2 Mil Rusty Red Discs

Starting at $7.1833
Based on the above selections this item has the following specifications:
Display Attributes

These tapes are manufactured from commercial grade polyester film single coated with a pressure sensitive silicone adhesive. It is a general purpose masking tape for powder and e-coating processes. Often used when higher heat resistance is needed than green polyester tape provides.

Product Features

  • Temperature Rating: 425° F / 218° C
  • All die cuts 3/8" or larger come standard with a split-back liner. Split liner for smaller dimensions upon request
  • Removes cleanly even after long bake cycles with no residue
  • Used in Powder Coating and E-Coating
  • Standard die cut sizes in stock or can be made to your specifications 


  • 2 Mil Polyimide Carrier
  • 1.5 Mil Silicone Adhesive
  • 3.5 Mil Total Thickness


  • Tensile Strength (lb/in) - 50
  • Elongation (%) - 100
  • Steel Adhesion (oz/in) - 35
ProcessPlating, Wet Spray, Powder Coating, Anodizing, E-Coating
Temperature Range0 - 425 F
I consent to the collection and processing of my personal data.