Masking Dots & Donuts Supplier - Polyester & Kapton Discs Distributor | Custom Fabricating & Supplies

Discs (Dots), Donuts & Tabs

Custom Fabricating & Supply’s selection of masking dots, donuts & tabs are great for a variety of applications, including powder coating, e-coating, anodizing, painting, plating and more! Our selection will save you time and money by allowing you to place die cuts faster and more accurately, with an extensive array of ready to ship options and the ability to custom fabricate to fit your specifications. Our die cuts are able to handle temperatures up to 500°F and the silicone adhesive we use provides clean removal with no residue, keeping your surfaces clean.

For special applications, we offer options with unique applications, such as abrasion, blasting and acid resistance, as well as thermal conductivity, electrical conductivity and the ability to conform to irregular shapes. Our discs, donuts and tabs are available in a wide variety of colors, sizes, adhesives and characteristics, but if you don’t see what you are looking for here, give us a call and we will be able to connect you with what you need. With competitive pricing, extensive capabilities and a strong focus on supplying high performance masking products, Custom Fabricate is able to meet all of your masking needs. Request a quote or order today!


Green Polyester Discs (GD) 400°F

  • Powder Coating
  • E-Coating
  • 2 Mil Polyester Carrier =2.5 Mil Total Thickness
  • Clean Removal

 


Green Polyester Donuts (GWD) 400°F 

  • Powder Coating
  • E-Coating
  • 2 Mil Polyester Carrier =2.5 Mil Total Thickness
  • Clean Removal

 


Green Poly Tab Discs (GTAB) 400°F

Our GTAB Discs series work great for applications where speed and precision are critical.  While the tab makes it much easier to place and remove, half of each of these discs are 100% transparent offering a clear visual for placement.  Our GTAB Discs also offer a seamless design which provides a leak proof seal for E-Coating, Plating & Anodizing!

  • Powder Coating
  • E-Coating
  • 2 Mil Polyester Carrier
  • 1.5 Mils Silicone Adhesive = 2.5 Mil Total Thickness
  • Clean Removal

Blue Polyester Discs (BPD) 400°F

  • Powder Coating
  • E-Coating
  • 1 Mil Polyester Carrier
  • 1.5 Mils Silicone Adhesive = 2.5 Mil Total Thickness
  • Conformable To Products
  • Clean Removal

 


Red Poly Discs (RPD) 425°F

  • Powder Coating
  • E-Coating
  • 1 Mil Polyester Carrier
  • 3 Mils Silicone Adhesive = 4 Mil Total Thickness
  • Conformable
  • Sharp Line Definition
  • Clean Removal

 


Yellow Polyimide Discs (KPD) 500°F

  • Powder Coating
  • E-Coating
  • 1 Mil Polyester Carrier
  • 1.5 Mils Silicone Adhesive = 2.5 Mil Total Thickness
  • Circuit Board Masking
  • Clean Removal

 


Glass Cloth Discs (GCD) 500°F

  • Powder Coating
  • E-Coating
  • 3 Mil Glass Cloth Carrier
  • 2 Mils Silicone Adhesive = 5 Mil Total Thickness
  • Conformable
  • Two Tone Application
  • Clean Removal

 


High Temp Crepe Discs (HCD) 325°F

  • Painting
  • 7.5 Mils Thick
  • Pressure Sensitive Masking Tape
  • Clean Removal

 


Aluminum Discs (AFD) 300°F

  • Plating
  • Painting
  • 3 Mils Thick
  • Thermally Conductive
  • Moisture & Chemical Resistance

 


Lead Foil Discs (LFT) 255°F

  • Chrome Plating
  • Nickel Plating
  • 6 Mils Thick
  • Electrically Conductive
  • Acid Resistant

2 Mil Polyimide (KPD2) 500°F

  • Powder Coating
  • E-Coating
  • 2 Mil Polyester Carrier
  • 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness
  • Fine Line
  • Two Tone Application
  • Clean Removal

2 Mil Orange Polyimide Disc (OPD) 425°F

  • Powder Coating
  • E-Coating
  • 2 Mil Polyester Carrier
  • 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness
  • Low Shrink Backing
  • Transparent
  • Clean Removal

Rusty Red Disc (RRD) 425°F

  • Powder Coating
  • E-Coating
  • 2 Mil Polyester Carrier
  • 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness
  • Low Shrink 
  • Clean Removal

2 Mil Blue Polyimide Disc (BPD21) 375°F

  • Powder Coating
  • E-Coating
  • 2 Mil Polyester Carrier
  • 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness
  • Lower & Shorter Bake Cycles
  • Clean Removal

Industrial Grade Crepe DISC (LCD) 225°F

  • Painting
  • All Purpose Tape for Non-Critical Applications
  • 5.3 Mils Thick
  • Pressure Sensitive Masking Tape
  • Clean Removal