1 Mil Blue Polyester Discs
Starting at $14.0065
SKU
BPD
These die cuts are manufactured from a thin, commercial grade polyester film with a pressure sensitive silicone adhesive. With a carrier of only 1 Mil it is extremely conformable and has very sharp line definition.
Product Features
- Temperature Rating: 400° F / 204° C
- All die cuts 3/8" or larger come standard with a split-back liner. Split liner for smaller dimensions upon request
- Removes cleanly even after long bake cycles with no residue
- Used in Powder Coating, E-Coating, Anodizing and Plating
- Standard die cut sizes in stock or can be made to your specifications
Construction
- 1 Mil Polyester Carrier
- 2.0 Mil Silicone Adhesive
- 3.0 Mil Total Thickness
- Roll Length - 72 yards
Specifications
- Tensile Strength (lb/in) - 50
- Elongation (%) - 100
- Steel Adhesion (oz/in) - 35
| Material | Polyester |
|---|---|
| Process | Plating, Wet Spray, Powder Coating, Anodizing, E-Coating |
| Temperature Range | 0 - 400 F |
